How Do I Control X10 With An Insteon Hub

For several years I have been controlling the heating in an apartment which is rented for days in an airbnb style using an X-10 dim rail switch. I take a php script which looks at the availability calendar of the apartment and switches the heating on a few hours earlier the guests make it and switches information technology off when they leave. A few days ago the webio device which I was using to connect the system to the cyberspace broke down so I bought an Insteon Hub. The documentation for using the insteon is very confusing. This is why I developed the url creator below. If you follow these instructions you should be able to control your X-10 device using an Insteon Hub in a couple of minutes.

The Insteon Hub comes with an ap which you can use to control X-10 or insteon devices only information technology is also possible to control devices using a url. (this volition allow you to use programs like php to write more than sophisticated command systems). If you want to employ your Insteon Hub in this way the get-go affair to do is to find the IP accost of the hub. The easiest way to practise this is to utilise a LAN scanner to find the device. There is a gratis program called avant-garde IP scanner which is very good. On my system the Insteon Hub is located at https://192.168.0.10 (note the 192.168 addresses are used on your local LAN system) The Insteon Hub has a web server and the default port is 25105 so to connect with the device the base url is this https://192.168.0.10:25105/ If I desire to send commands to my device I would replace the https://mydomain.com in the form below with https://192.168.0.10. So I tin utilize it to create the urls necesary to control my device.

Equally I want to control the devices over the internet information technology is necesary to configure the router. I added an entry into Port Forwarding which forwards the traffic on port 25105 to https://192.168.0.10 Information technology is too a good idea to tell the router to give the Insteon Hub a static ip address. I also got a free Dynamic Domain Name from no-ip.com and then that I tin can use a domain name for the url. Most modern routers permit Port Forwarding and Dynamic Domain Names. In one case this system is set upward I can use the urls created in the organisation below in my php program. My php script uses a system called Curlicue to open the urls.

Buy Insteon Hub Amazon.co.united kingdom Buy Insteon Hub at Amazon.com U.s.

There is an piece of cake to utilize javascript version of this page here

This is a link to a PHP script which you can use to control devices.